Packaging Tester

Owing to their unsurpassable performance, they have garnered appreciation from a large number of customers. Coulometer method is a quantitative test method for measuring oxygen permeates the sample by using a coulometric sensor. In this method, the concentration difference drives oxygen penetrating the sample. The specific process is that the pressure on both sides of the sample remains equal during the test. One side of the sample uses high-purity nitrogen as carrier gas and the other side uses high-purity oxygen. After the oxygen permeates to the nitrogen side of the sample, it is carried to coulometric sensor by nitrogen through the analysis, the oxygen permeability of the sample can be obtained.

APR members are often willing to make their MRF and reclaiming facilities available for such evaluations. Our vision is to become the global supplier of choice in testing instruments by providing our customers with technical expertise, service and advanced easy-to-use products surpassing their expectations. ASTM F2029 is the standard practice for making heat seals for the determination of the heat sealability of flexible webs as measured by seal strength. Whether you know exactly what testing you require, or your unsure of the right testing route our team of experts are on hand to guide you through the various plastic testing programmes to identify the best one for you and your product. All our testing programmes include full reports including the method of plastic testing and a full analysis of results and further recommendations. All of our testing is performed by our expert staff and can be trusted thanks to our UKAS accreditation and 100% independence, while we pride ourselves on offering the best customer experience in the industry. The ability of insulated shipping containers to protect their contents from exposure to temperature fluctuations can be measured in a laboratory. The testing can be of empty containers or of full containers with appropriate jell or ice packs, contents, etc. Ovens, freezers, and environmental chambers are commonly used for this and other types of packaging.

cap principle

Tyvek® has been known to provide superior microbial barrier under the most rigorous, highly contaminated conditions. Tyvek® is made of continuous, randomly oriented high-density polyethylene filaments. This unique structure gives Tyvek® greater resistance to microbial penetration than other packaging materials. Yes, in our packaging material testing lab, food-grade testing is conducted on the packaging materials that come directly in contact with the food item. This ensures that no toxicity transfers from the material to the food, and the item remains safe for consumption until it gets delivered. We have highly qualified team of professionals which is passionate about achieving the perfection in manufacturing of the machine.

Hence the manufacturers of paper need to ensure that they use the Paper testing instruments to ensure the best quality of the products is delivered to the customers. Additionally, with the help of testing data, it becomes very easy to optimize the manufacturing process and hence ensure maximum profits as well. There is a wide range of features and properties of plastics which determine their quality such as the molecular elasticity. This particular feature is very important is evaluating the stiffness of the product which explains the strength of the plastic to withstand the force applied on its surface. Generally, the plastic films are utilized for fulfilling packaging requirements of products. While transportation or handling these films can experience distinct phrases of wear and tear. Hence, it is vital to conduct a standard test method for computing the impact resistance strength of the plastic films usingDart Impact Tester. Saicheng Instrument Company is a technology-based enterprise dedicated to the development, production and sales of physical property testing instruments.

The whole idea of packaging materials for the products is not leaving the products uncovered and unprotected. As these products are stored or transported, they need to be stay protected from factors that may affect the integrity and safety of the products like the extreme forces that act upon them during handling. There are differences forces with different amplitude acting upon the products during different stages of delivery right from the storage to the transportation. These instruments can easily assess different aspects of their quality and give information about which aspects of quality need attention and can be improved. Plastic Packaging Testing Instruments, commonly used in food, medicine, medical equipment and other industries. Plastic packaging also directly affects the quality of products, so plastic packaging companies need a lot of testing equipment to confirm whether their plastic packaging is qualified. Among them, the tightness tester is a basic instrument necessary for plastic packaging manufacturers. Because the sealing performance of the package directly affects the shelf life and quality of the product. For example, Presto which is a one of the leading manufacturer of testing instruments based in India offers packaging testing equipment as per industrial standards. ‘Box Compression Tester’ is one the packaging testing equipment offered by company and it is ASTM D4169, ASTM D642, ISO compliant.

For many sterile liquids, powders, freeze dried formulations, and solid dosage product this means protection against reactive gases such as moisture, oxygen, and/or carbon dioxide. The LIGHTHOUSE laser absorption spectroscopy method for headspace gas analysis enables robust characterization of the primary packaging of sterile pharmaceutical drug product. Seal-Scan® technology provides advanced digital imaging software tools for process control which offers in-depth seal quality analysis. Seal-Sensor is the online configuration for automated inline scanning of pouch seals that will find defects 100% online. Tyvek® gives the premium microbial barrier protection for sterilized medical instruments and pharmaceuticals. Apart from protecting the medical devices and pharmaceutical products from physical damages, medical and pharmaceutical packages also should provide an effective microbial barrier and help to maintain the sterility of the products. Bacteria and viruses with sizes varying from 0.002 to 100 microns are a constant threat to pharmaceuticals and medical devices which in turn can be hazardous to the patients. Some MRFs use vacuum systems to suck out as much flexible plastic packaging at the as possible at the onset before it has a chance to create problems.

Always go for the brand and high-quality instruments that are manufactured by reputed manufacturers of testing machines. The testing machine is designed using highly standardized raw material and special and sophisticated features that help to create the accurate amount of hydraulic load to test the sample. Watch the video above to find out more about our packaging testing equipment or visit the Library where you can find application notes and articles such as How to Test Packaging. Some of the most common test types within packaging testing are tensile strength, friction, tearing strength, compression, peel and puncture. AMETEK Sensors, Test & Calibration are specialists in packaging testing equipment for all industries. Some of the prominent players in packaging testing equipment are Test Techno Consultants, Presto, SGS S.A., Intertek Group Plc., Eurofins Scientific SE, Thwing Albert, ALS Limited, AMETEK.Inc., Testing Machines, Inc., and Angels Instruments. The standards such as, ISTA have predefined test for testing the packaging of products. These tests are used to check that the product will survive or not in shipment process. A puffed cheese-flavored snack product had a bad odor when the packaging was opened after short-term storage and distribution to retail locations.

Tear testing has been performed for more than a half century to measure the mean internal resistance of substrates to the propagation of a deliberately initiated tear to determine its dynamic resistance. Protective coverings are commonly used as for various products and plastics film is normally used as the material. Often, these low peel force films are used to protect LCD screens and other scratch-prone surfaces. The force required to remove the film is very important for both the consumer and the manufacturer. The film must be easy to remove, yet the bond must be strong enough to remain intact for product security. Some of the most common test types within plastics testing are tensile strength, elongation to break, yield strength, modulus, Poisson’s ratio, compression, flexural, shear and friction. Saicheng provides a large quantity of equipment for our packaging quality control. We appreciate Saicheng’s contribution in the construction of the testing laboratory.

Leachable impurities can migrate from components in container closure systems, packaging systems, storage systems, process equipment and device packaging, that can affect the overall purity and safety of the therapeutic product. In order to identify potential sources of leachables, it is important to conduct controlled extraction studies to identify extractables and the components that generate them. Hence Extractables and Leachables (E&L) testing is crucial to product release. Nelson Labs packaging solutions department has experience with successful validations encompassing multiple product, package and sterilization configurations throughout the medical and pharmaceutical industries. We use proven state-of-the-art technology to provide fast and accurate results. Today, John heads our Film Lab in Charlotte, NC and is our resident materials specialist. His knowledge and experience are put to work in developing film products as well as selecting films for our customers or replacing existing films for better performance and cost savings. John has worked in the development of trash can liners, coextruded food packaging films, laminations, and PVC flow wrapper films.

It is equipped with three individual test dishes and the testing process is completely automatic and conforms to international standards. For example, FSSAI have standards such as IS for checking contact of Polyethylene with foodstuffs, IS for checking Styrene Polymers contact with foodstuffs, and others. These standards are verified using packaging testing equipment by testing plastics which is in contact with food items. The tear-away seal on a single-use container was delaminating instead of cleanly separating from the lip of the container. A customized grip method was created for the Mechanical Test System and containers which had been sealed by different methods were opened by the instrument. The bad seals failed under a lower tensile force than that required to open the good seals. Inconsistent extrusion conditions had caused poor adhesion in regions of the sheets of material used to make the seals. Depending upon the expected stresses and loads of the application any number of tests will be performed upon a plastic material to predict its behavior under those forces.

The first cellulose-based plastics were developed already before anyone even thought of using oil as a raw material. Cellulose acetates, which are still extensively used, date back to that time but their thermoplastic properties require large amounts of additives. Thermocell, which is produced from cellulose and fatty acids, shows thermoplastic behavior with no additional substances at all. LIGHTHOUSE headspace analysis can be used in a variety of ways to detect a leaking container. Our oxygen ingress test method makes rapid, non-destructive oxygen measurements to determine the amount of air that has leaked into a container through a closure defect. New cell and gene therapies as well as certain live viral vaccines require deep cold storage.

As global purchasing has become commonplace over the past several years , with it has come challenges such as counterfeit materials, necessitating counterfeit materials testing, reverse engineering analysis and materials verification. A plastic drill housing being readied to undergo extended weathering testing in a QUV tester. Choose a search category below to find our products by application, test property or standard. a) Preformed plastic containers intended to be used for the packing of large volume parenteral shall be moulded in-house by one-continuous operation through an automatic machine. c) USP Type-lll glass containers may be used for non-parenteral sterile products. The design of the closures, containers and stoppers shall be as such as to make an airtight seal when fitted to the bottles. Examination of the packaging and labeling materials for suitability and correctness before start up of packaging operations and documentation of such examination in the batch production record. Identification of drug product with lot or control number that permits determination of the history of the manufacture and control of the batch.